The LG washer IE error code indicates a problem with the water inlet process. This means that your washer is experiencing difficulty in filling with water, which is essential for completing the washing cycle.
Common reasons for this error code include:
- Blocked or kinked water inlet hoses
- Malfunctioning water inlet valve
- Clogged filters
- Low water pressure
How To Clear The IE Error Code?
Try resetting and clearing the IE error code. Follow these simple steps:
- Unplug the appliance from the electrical outlet to ensure safety.
- Wait for about 30 seconds to allow the washer to reset.
- Plug the power cord back into the electrical outlet.
- Press the power button to turn on the washer.
- Run a quick cycle without any clothes to see if the error code has been cleared.
If the error code persists, it’s time to fix the issue.
Fixing The LG Washer IE Error Code
Checking The Water Inlet Hoses
- Turn off the water supply to your washer.
- Disconnect the water inlet hoses from the back of the appliance.
- Inspect the hoses for any kinks or damage. If you find any, straighten the hoses or replace them if necessary.
- Check for any blockages inside the hoses. Clear any debris to ensure proper water flow.
Inspecting The Water Inlet Valve
- Turn off the water supply and unplug the washer from the electrical outlet.
- Remove the top panel of the appliance to access the water inlet valve.
- Check for any visible damage or leaks. If you find any, you may need to replace the water inlet valve.
- Test the water inlet valve for continuity using a multimeter. If there’s no continuity, replace the valve.
Cleaning The Small Filters
- Locate the filters at the end of the water inlet hoses or inside the water inlet valve.
- Remove the filters by unscrewing the hoses or using needle-nose pliers to pull them out.
- Clean the filters under running water, using a soft brush if necessary.
- Reinstall the filters and reconnect the hoses.
Examining The Water Pressure
- Turn off the water supply to your washer.
- Disconnect the water inlet hoses from the back of the appliance.
- Place the hoses in a bucket or tub.
- Turn on the water supply and observe the water flow. If the pressure is low, contact your water provider or a plumber to address the issue.
Preventing Future IE Errors
To keep your LG washer running smoothly and prevent future IE error codes, follow these tips.
- Regularly inspect the water inlet hoses for kinks or damage.
- Clean the filters at least once every three months.
- Ensure that your home’s water pressure is adequate.
- Avoid overloading your washer, which can strain the water inlet system.
Maintaining Your LG Washer
Proper maintenance is crucial for the longevity of your appliance. Here are a few tips to keep your LG washer in top condition.
- Clean the washer drum regularly using the tub clean cycle.
- Wipe the door seal and glass after each use to prevent mold and mildew buildup.
- Keep the washer balanced by leveling the feet and evenly distributing your laundry.
- Avoid using excessive detergent, which can cause residue buildup.
Q: Can I use my LG washer if the IE error code persists?
A: It’s not recommended to use your washer if the IE error code is displayed, as it indicates a problem with the water inlet process. Running the washer without resolving the issue may cause further damage to the appliance.
Q: How often should I clean the filters in my LG washer?
A: It’s a good practice to clean the filters in your LG washer at least once every three months to ensure proper water flow and prevent clogs.
Q: Can low water pressure cause the IE error code on my LG washer?
A: Yes, low water pressure can cause the IE error code, as it may prevent the washer from filling up with water properly. If you suspect low water pressure, contact your water provider or a plumber to address the issue.
Need more help? Add your question or comment below about your LG washer, and any error code, and a professional appliance repair technician will help you.